I have an 88 OMC 140 in an 88 Bayliner. The motor was completely rebuilt and reinstalled. I replaced the water pump, fuel pump as well.
I can run the boat for 1 hour and it runs great, at about 1 hr it starts to miss and it lead to a stall and no run situation. After some time it will restart and run fine again.
I had a Pertronix installed but reinstalled the points ignition thinking it was Pertronix breaking down. The ignition coil is a stock one and checks out fine with 3 ohm resistance.
All fuel issues have been checked, carb was rebuilt by a shop, anti siphon was removed and temp using a brass fitting.
I have been dealing with this issue for 6 weeks now and cannot find the problem.
Please HELP !!!
I can run the boat for 1 hour and it runs great, at about 1 hr it starts to miss and it lead to a stall and no run situation. After some time it will restart and run fine again.
I had a Pertronix installed but reinstalled the points ignition thinking it was Pertronix breaking down. The ignition coil is a stock one and checks out fine with 3 ohm resistance.
All fuel issues have been checked, carb was rebuilt by a shop, anti siphon was removed and temp using a brass fitting.
I have been dealing with this issue for 6 weeks now and cannot find the problem.
Please HELP !!!