GRIZZ56
Recruit
- Joined
- Oct 10, 2008
- Messages
- 2
I have a 4 stroke, 90 H.P. Merc on a 19' Alumaweld Stryker and the only gauge I have on my dash is a fuel gauge. I would like to put on a Tach, Water Temp or Pressure and Volts. Mt delemma is that I have no clue on which wire to use on the harness to accomplish this, all I have are a bunch of wires by the control box that dead end. Also I would like to know what year it is, it's either a 2004 or 2005 and has the Red Stripping on the engine cowl.
Any help would be appreciated!
Any help would be appreciated!