90hp Johnson "No Oil light"

Joined
Mar 31, 2005
Messages
4
I have a new 2005 90 hp 2-cycle with 4 hrs on it so far. I have premixed 50-1 oil in the fuel tank and have oil in the oil tank. The first 3+45 hrs on the engine were perfect, then while pounding through another boats wake the "No Oil" light and horn came on. I shut the engine down, checked the tank(it was full)and pumped he bulb which was still very firm. Started the engine, light was out. Five minutes later horn and light came back on. Since I am premixing the fuel during break in I was not worried about engine damage. A few weeks later I put the boat in and cranked it up and the same thing, light and horn after a few minutes at idle. It all started after pounding through another boat's wake. Any ideas?<br /><br />Thanks,<br />TCPC
 
D

DJ

Guest
Re: 90hp Johnson "No Oil light"

I would be looking at several things, in this order.<br /><br />1. Chafed wires (rough seas) at the engine.<br /><br />2. Faulty guage.<br /><br />3. Faulty wiring, at the helm.<br /><br />4. Water in the oil tank. remember, water is heavier than oil and sinks to the bottom.<br /><br />Keep pre mixing until you figure this out. Also, mark a line on the oil tank and see if it is actually using oil.
 

rabidfish

Senior Chief Petty Officer
Joined
Oct 3, 2000
Messages
788
Re: 90hp Johnson "No Oil light"

I'd be calling the dealer you bought it from, and getting someone on the job "pronto" !
 

marinemech1

Chief Petty Officer
Joined
Mar 26, 2005
Messages
623
Re: 90hp Johnson "No Oil light"

motor is under warranty don,t screw with it take it to your dealer and let them fix problem
 
Joined
Mar 31, 2005
Messages
4
Re: 90hp Johnson "No Oil light"

Thanks for the info and I will look at those items you mentioned. I will take it back to the dealer soon. I hoped for an easy fix.<br /><br />TCPC
 
Top