93 evinrude 200 looper stating problem

statefedrl

Cadet
Joined
Aug 8, 2006
Messages
21
fellas, on land 1 hr before launching starts and runs fine, went to ramp and primed bulb fired i time and then nothing checked fuel line and had air in line, purged line and fuel to pump but no go. checked spark at plugs and ok. they say that the key switch has to be held in while cranking 1st time. to activate selinoid. did that no go just turning but not firing. even held choke open to blow out fuel figuring shes flooded. still no go. appreciate your comments on what to try next. thanks richard
 
Top