93 Lund Tyee restoration

TCKibe1

Cadet
Joined
Mar 27, 2021
Messages
16
Hi all I just picked up a Lund Tyee 1850 with an Evinrude 150 and a karavan tandem steel trailer for $750.00 . I've got it running after replacing pretty much anything on the engine that could leak fuel. My question involves the boat itself. Someone removed the floors up to the control station and there's a step down where the fuel tank is mounted. Does anyone know what was in the center of the floor? Was it just a slightly thicker piece of plywood or an aluminum plate. I'm assuming it's a removable panel to provide access to the fuel tank. I plan on putting a floor down next week, and rebuilding the rest of the boat once I know the engine is solid. Thanks, Tim
 

TCKibe1

Cadet
Joined
Mar 27, 2021
Messages
16
Foam was a little waterlogged. This boat has been sitting for 10+ years.
 

Attachments

  • PXL_20210329_124836147.jpg
    PXL_20210329_124836147.jpg
    2.7 MB · Views: 14
  • PXL_20210329_124844016.jpg
    PXL_20210329_124844016.jpg
    2.5 MB · Views: 11
  • PXL_20210329_181525627.jpg
    PXL_20210329_181525627.jpg
    2.5 MB · Views: 13

TCKibe1

Cadet
Joined
Mar 27, 2021
Messages
16
Deck boards all epoxied up and curing.
 

Attachments

  • PXL_20210402_203833001.jpg
    PXL_20210402_203833001.jpg
    2.3 MB · Views: 5

TCKibe1

Cadet
Joined
Mar 27, 2021
Messages
16
Checked the transom today, there wasn't one.
 

Attachments

  • PXL_20210403_172557465.jpg
    PXL_20210403_172557465.jpg
    2.4 MB · Views: 13
  • PXL_20210403_174003852.jpg
    PXL_20210403_174003852.jpg
    2.4 MB · Views: 11
  • PXL_20210403_200652863.jpg
    PXL_20210403_200652863.jpg
    1.9 MB · Views: 11
  • PXL_20210403_201802193.jpg
    PXL_20210403_201802193.jpg
    2.8 MB · Views: 11
  • PXL_20210403_172557465.jpg
    PXL_20210403_172557465.jpg
    2.4 MB · Views: 9
  • PXL_20210403_174000043.jpg
    PXL_20210403_174000043.jpg
    2.6 MB · Views: 10

TCKibe1

Cadet
Joined
Mar 27, 2021
Messages
16
Installed new transom wood and re-skinned with.060 5052 sheet and 3m 5200 troweled between, hung the engine back on.
 

Attachments

  • PXL_20210408_163800166.jpg
    PXL_20210408_163800166.jpg
    2.8 MB · Views: 6
  • PXL_20210410_211938870.jpg
    PXL_20210410_211938870.jpg
    2.3 MB · Views: 4

TCKibe1

Cadet
Joined
Mar 27, 2021
Messages
16
Finished the foam and installed the decking today. Got the seats mounted too.
 

Attachments

  • PXL_20210412_154136427.jpg
    PXL_20210412_154136427.jpg
    2.8 MB · Views: 5
  • PXL_20210412_161712714.jpg
    PXL_20210412_161712714.jpg
    2.3 MB · Views: 6
Top