94 Force 50hp

[hanahawaiian]

after i been search alot alot.. and went West Marine near by my house.. and they dont have parts # in book or computer for Force 50hp 1994 Impeller????

beacsue when i start the motor and i notice no Pee water come out???.

anyone can help me out?

thanks
Chris

 

[jwpayne]

Re: 94 Force 50hp

What's the model and serial number?

 

[pnwboat]

Re: 94 Force 50hp

Any of these sites have it.

http://www.boats.net/parts/search/Merc2/Force/50%20H.P.%20%281992-1994%29/0E000001%20THRU%200E093699/GEAR%20HOUSING/parts.html

http://www.crowleymarine.com/mercury-outboard/parts/1469_230.cfm

http://www.dougrussell.com/partscatalog/components/index.cfm?fuseaction=viewparts&colid=06&coldesc=50%20H.P.%20%281992-1994%29&index=1469&block=23&BlockNumberList=2,8,9,11,10,16,15,25,26,24,22,4,12,13,29,30,23,18,3,0,27,6,7,19,28,14,17,5,20,21,31,1

 

[hanahawaiian]

Re: 94 Force 50hp

it is easy to replaced it? I have skill with build Chevy engines and i build Drag racing/ Road Racing.. also i have alot tools in my shop..

Im thinkin about take off lower gear and pop water pump housing and look at impeller and get # parts on Impeller...
and going to near by Mercury or mecuriser dealership repair shop to buy New impeller and gaskets..

Also i have Force Service Manual..

 

[pnwboat]

Re: 94 Force 50hp

You should have no problem. Here are step by step instructions.

http://forums.iboats.com/showthread.php?t=231685

 

[hanahawaiian]

Re: 94 Force 50hp

thanks.. but 50hp are diffrent from 100-150hp.. but 50 is really easy.. only shift bolt on bottom and unconnected it.. and i belive so.. i gotta read book again make sure..

 

[Banditz]

Re: 94 Force 50hp

UUmm if you egine is like mine, a 1990 force 50, then you wont have a pee stream. Instead you just have two little holes in the back that kinda spurt water out, not alot at all. Will be warm water coming out. just a thought, not an expert by any means. Dunno if they cheanged or not buddy. Good luck.

 

[hanahawaiian]

Re: 94 Force 50hp

Bandzit your right..

I just pulled out and check impeller look good.. and i checked parts look good water pump housing, Impeller look like new, Impeller Water pump plate.. and i dont see any Gasket???

I put back together and firing motor and i finally got 2 holes spitting water out.. it good! and but water was leaking out by 4 bolts on lower gear.. i guess it need put gasket in water pump housing..