'95 40hp Mariner ELPTO

poolshark38759

Petty Officer 2nd Class
Joined
Feb 3, 2003
Messages
155
i have a one on a Tracker Pro17 boat. OB serial # is 0G223601 for ref.

it has been setup for a year or so since last run. i know i need a water pump kit. it also is leaking water around the end plate on theh #1 and #4 cylinders just below spark plug.. it is putting a good stream out of the tell-tell hole also like it think it should (flow increased and decreases with throttle).. the water doesnt leak around #4 at idle but starts at so 1/4 throttle and doesnt start leaking at #1 until 2/3 throttle. (dont know RPM as tach is not functioning) [all this is on muffs]..

i am working on getting things fixed as i get time and $$..just wondering what all gonna be wrong..

of my gauges only volt meter works, tach, fuel, and speedo dont..
 

poolshark38759

Petty Officer 2nd Class
Joined
Feb 3, 2003
Messages
155
Re: '95 40hp Mariner ELPTO

also-- i need to replace the engine mounting bolts that hold engine to yolk.. i have found them on line but dont know if i need the large or standard kit..

sn# OG223601
 
Top