FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Hey guys. Just noticed my choke solenoid manual valve only turns about 90 degrees. The manual somewhat implies it should turn a full 180. Is something wrong here?
lever is inline with body in RUN position, 1st photo is correct. it wont dump fuel until the lever is even higher than the 2d pic (away from body) usually. is your spark advance and cam roller ok with both outer rubber sleeves present?
lever is inline with body in RUN position, 1st photo is correct. it wont dump fuel until the lever is even higher than the 2d pic (away from body) usually. is your spark advance and cam roller ok with both outer rubber sleeves present?
Which rollers are you referring to? I did find one forward of the picture that was busted. Its a yellow sleeve. Stupid thing is like $30, it seems to run fine as is.