Alpha and bravo 1 props

[system-f]

I have searched everywhere for this and iboats shows the same spline count and gear case diameter, but:

Will a prop that fits an alpha fit a Bravo One? (I know Alpha and Bravo Two/Three are WAY different)

 

[jaxnjil]

Re: Alpha and bravo 1 props

the inner shaft is the same but be careful with the outside diameter. you will hit the anode-trim fin on a alpha if not careful.
you can get a flat one if you have power steering or just break the one you have off.
i have a couple of mirage II vented props that were 15" dia.(i think) after changing the anode to a flat one they worked.
the dealer i bought them from said just break the tab with a hammer. as stated i bought a new flat tab. breaking didnt seem like a good idea.

 

[system-f]

Re: Alpha and bravo 1 props

That's what I thought. I have already had to trim my trim tab for standard alpha props.


Thanks,