FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
ok I just removed the lower and took apart the water pump assembly. My question is do I have to use the 2-4-c lube for reassembly or could I just use ordinary wheel bearing grease? Thanks!
ok I just removed the lower and took apart the water pump assembly. My question is do I have to use the 2-4-c lube for reassembly or could I just use ordinary wheel bearing grease? Thanks!
You're talking about lubing the impeller for first ("dry") startup.
You can use Dawn dishwashing detergent if you like or vegetable oil..... It doesn't matter. After the first few min of running it'll all be washed out regardless of what you use.
Volvo packs a little tube of glycerin in thier kits, We just use a shot of silicon spray. Remember to turn the shaft clockwise from the top to properly set the vanes.
