Appleo's 1985 Starcraft Supersport 18 foot - Restoration 2019/2020

[appleo]

technically yes a stranded product

3/4 inch flooring tongue groove higher glue content and guaranteed to withstand outdoor rain exposure at jobsite

fyi. i took a 3x3 sheet and sank it in my pond with concrete bocks for12 months

zero separation, delam or any other damage except dirty upon retrieval

i do seal it with spar for boat restorations. ....use a lot less flooring cement when sealed ,

some fellas on tinboats.net set me onto this. good stuff.

 

[appleo]

Down the home stretch. snow here in upstate new york.

Wife making seat and head cushions for the repurposed a Moeller captains chairs

Transducers mounted on piece of king starboard

 

[Watermann]

Might should keep the post on your SS all in one thread where guys are already following.

So yeah the windshield height on the SS models has you looking over the windshield. Get an adjustable pedestal with a slide so you can make it the way you want even if off a bit.

 

[GA_Boater]

Moved this into your existing seat thread. Keep stuff together, as I have question that is in this thread.

You said above your box was 13" high, so how can the seat base be 12" above the deck? Have you changed your mind about the seat above?

The original seating was back to back lounge seats on a 8" or 10" base. I hope we don't have to tell you how to use a tape measure, but just in case, the same way you came up with 12 or 13 inches.

This may be moved into your resto thread - Debating. Don't be surprised cuz that's where it belongs.

 

[appleo]

Original seats were missing so thanks for the seat box height 10" tip !!!!