FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Go to this link, type in AQ170 in the "engine type" box, hit enter. Under aq170a there is an operstors manual you can download. It shows the location of the drains. Yep, all six
I looked and there is no pet **** for the block, just a plug with a square hole. Of course it must be metric, larger than 1/4" smaller than 3/8". For tonight I put a heat lamp on it. If I cant find some square stock that fits and get the plug out tomorrow I'll drill a hole in a soft plug and deal with that later.
I looked and there is no pet **** for the block, just a plug with a square hole. Of course it must be metric, larger than 1/4" smaller than 3/8". For tonight I put a heat lamp on it. If I cant find some square stock that fits and get the plug out tomorrow I'll drill a hole in a soft plug and deal with that later.
Not sure what your saying. The plug has a square hole??? Is it hex or an Allen wrench needed perhaps, or is the head of the plug square? If so, try some 12 point sockets.
The plug has a square HOLE. A 1/4" ratchet spins in it and I couldn't drive a old 3/8" extension in to it. If I can't find 5/16 square stock I'll do some grinding on the old extensionto make it fit.
