AQ275 help needed..

[mopower440]

Hello, I have a 1986 bayliner with the AQ275 drive. I am trying to remove the helmet pin. Does anyone know what size bolts i need for the 'jacking bolts' to get the pin out? The pin has 2 allen bolts that come out, then i have 2 threaded holes where jacking bolts go to push the pin out.
Thanks

 

[captmello]

1/4" x 20 tpi

 

[jerryjerry05]

Use hardened bolts/screws.

 

[Scott Danforth]

tighten each one 1/2 turn at a time when they bottom out to walk the pin out

 

[mopower440]

Thanks everyone!