Asking for help with Johnson 1956 3hp decal

[Plankwalker]

I recently ordered a set of decals for a JW-12, a 1956 3hp Johnson. I was underwhelmed by the quality. I plan to recreate my own as I have done in the past.
I do need some help confirming what one of the decals looks like. Its the "three" on the side of the lower shroud.
I include a picture of the one I have on the engine I am restoring. The outer circle and the inside of the #3 appear to be foil and not painted. The inner circle is the 1955-58 Johnson Cream. The outline of the circle and #3 looks like the Johnson Green Gold. There also appears to be a thin black outline on the four-pointed 'compass' shape.
Could one or more of you reply with images of original decals in better shape so I can confirm the colors?

BTW, this restoration will only begin in earnest in about 1-2 years from now, after I am finished with a 1964 JW-19. I will give it its own thread at the time.
Thank you,
Plankwalker.

 

[hardwater fisherman]

I do not know if this will help..

 

[Plankwalker]

I do not know if this will help..

Thanks, but I am looking for images of originals. I do not find these decals close enough to the original, at least not for the "Three" symbol.

 

[Plankwalker]

This is the typical decal you can order for the "Three" symbol:


This is what I threw together with some electronic tracing:

I am also considering to have the grey area printed as clear, and put the decal on foil. Then glue the foil to the shroud and clear coat it. I will experiment with both options.
Any photos of original decals would be appreciated.