Attwood Fuel Line Water Separator

[jt1520]

Setup up my fuel line separator, but when I pump primer bulb, no fuel flow. Followed arrows properly for fuel flow. Question: does it matter if both fuel lines are used on one side of separator or does there need to be lines on the in and out on opposite sides of the separator for the fuel to flow properly? Mine is setup like the picture here, but is this a problem?

Thanks.

James

 

[wired247]

Re: Attwood Fuel Line Water Separator

try it like this. It will work better.

 

[jt1520]

Re: Attwood Fuel Line Water Separator

Thank you for replying wired247! I will make the change and hopefully that will solve the issue. Much appreciated!

 

[Maxz695]

Re: Attwood Fuel Line Water Separator

di you try priming the filter (add fuel to it) It may help with the draw from the tank

 

[jt1520]

Re: Attwood Fuel Line Water Separator

Ahhh, Thanks Maxz695. That also is something I didn't do. I'll give both suggetions replied to a try. Thanks guys!

 

[oldman570]

Re: Attwood Fuel Line Water Separator

Placing the primer bulb between the ftlter and tank will make priming alot quicker, along with filling the filter with fuel before putting it on the filter housing. JMO
oldman570