Blown fuse or ????

[dubya1982]

We bought a new Bentley pontoon in April and had the dealer install a depth gauge.

It has been working fine up until last week. When we trailered the boat the depth gauge was working fine. The next day when we got in the water I flipped the AUX switch to power on the depth finder and nothing happened. The little light on the AUX switch didn't light, I think it indicates that there is no power.

Could this be a blown fuse... or?

If it is, I am having a hard time finding the fuses for the boat. Any idea where they'd be on a Bently 220 Cruise? The owners manual makes no mention of it.

I checked the connection and it looks like everything is connected and no wires came loose.

I don't want to take it back to the dealer because they've been an absolute nightmare. Last time I went in I had some trouble with the service dept manager. This is probably the worst boat dealer in the history of boat dealers.

Any advice would be very much appreciated.

There are 5 or 6 aux switches. All of them work and the light on them comes on when they are flipped on. They also power up all of the different things they control (radio, deck lights, doc lights, etc.)

 

[MH Hawker]

Re: Blown fuse or ????

some of the panels have a fuse holder by the switch and on others its in the console .

 

[5150abf]

Re: Blown fuse or ????

Look for breakers and they should be right on the dash itself, I don't know anything about Bentley but that is pretty standard practice now.

They are normally right in line with the switches.

If it does have actual fuses the fuse panel would be probably under the console or close to it, call your dealer and he should be able to tell you right where they are, btu your real problem is why did it blow the fuse, maybe ebst to just take it back and hav ethem sort it out.