FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
mostly cosmetic... paint job, some crack and gouge filling, glassed the deck, carpeting, rewired dash, that kind of thing... the one thing i am worried about is that the boat, according to the previous owner, hasnt been on the water for 2 years.... so i am not sure what all i should do when i do drop it in...
As to the work you had done, take a few moments when first splashing her, look for any water coming in etc, check that your bilge pump works, and that you have all necessary safety equipment on board, and try not to beach her on gravel ..................have fun!
As long as you won't be holding anyone up at the ramp, I would back her in the water and leave her on the trailer for a few minutes while you look around for any leaks. Then take her out slowly. Make sure there's no problems shifting, steering, or trimming. Take her on up to planing speed. Listen and feel for any unusual vibrations, knocks, pings, grinds, etc. while going straight and while turning. If you are satisfied, take her on up close to WOT for a bit and up and down the rpm range just listening and feeling. If you are satisfied still, GIVE HER HELL!!!!!!!!! And have some fun will ya, while the rest of us work on our boats
might be a bit longer than i thought before i get her in the water.... mechanical issues developed and need to get addressed before i can even think about dropping her in....
ok well got it in the water... no leaks.... ran great for about 15 min and then started loosing power.... then couldnt get it started again.... think i have it figured out that i have a bad alternator... atleast i hope thats what it is... any ideas??? can only get 2000 RPM at full throtle.... engine sounds like it is starving itself from fuel and looses power.... i am replacing the fuel filter.... any help would be great
Make sure you have a Shore based contact, a cell phone, an OAR or PADDLE, a Fire Extinguisher, lifejackets etc... Be a GOOD BOY SCOUT and be prepared. It ain't fun if yer sinkin , dead stopped, or on Fire!!!