Bow Light Assy

[winterhawk78]

The bottom busted out of my bow light so i need a replacement. Any suggestions on a good replacement? I use the short 9 inch bow light. And would it be 2 pin or a 3 pin?

Boat is an 06Nitro 929 CDX

 

[gm280]

May need a picture or three on this question... Usually a typical two wire setup (positive and ground) is all it should take. But not knowing what you are dealing with could change that answer. JMHO

 

[winterhawk78]

May need a picture or three on this question... Usually a typical two wire setup (positive and ground) is all it should take. But not knowing what you are dealing with could change that answer. JMHO

Will try to get a picture or two uploaded this evening. Thanks

 

[mike_i]

I'm guessing it should be two wire, usually a black and a white wire.

 

[winterhawk78]

Maybe these pictures will help.

 

[gm280]

Looks like it takes the two plug pole type light. So a power and ground should be all it need to work.

I used one like this;

 

[winterhawk78]

Looks like it takes the two plug pole type light. So a power and ground should be all it need to work.

I used one like this;

Thanks for the help.

 

[winterhawk78]

I get my new 2 pole light in today. So of course I go to take the old one off and then I have another issue. Why the big piece in the front has two wires coming out of it and the part where the light plugs in has three.

Any thoughts??!!

 

[winterhawk78]

How would I wire up the new light and what wires do I cut and do away with?

Or do I in fact need a 3 pole light socket instead of the two pole?