Bravo3 raw water impeller

agallant80

Commander
Thread starter
Joined
Oct 25, 2010
Messages
2,328
Does anyone know what the Merc and Sierra part numbers are for the raw water pump on a Bravo3? Are all of the impellers the same? I want to keep an extra one on the boat. Should I get the kit or just the impeller?

Thanks
 

Mischief Managed

Lieutenant Commander
Joined
Dec 6, 2005
Messages
1,928
Re: Bravo3 raw water impeller

Depends on the engine, not the drive when you geta Bravo pump. There have been three different Bravo raw water pumps that I know of. Best bet is too look it up based on your engine serial number. I think your engine needs: 862232A2, but I am not sure.
 

MarkSee

Lieutenant Junior Grade
Joined
Sep 10, 2010
Messages
1,172
Re: Bravo3 raw water impeller

Here's a little screen capture of what I found where the impeller itself for the plastic bodies is the same but the brass style is a different part # and mentions about having a block drain.

My year 2000 is the single piece plastic and I bought the whole kit the first time 2 times I did the annual service but this coming maintenance I'll probably jus replace the impeller if the plate and oring look ok when I take it apart.

Using these part numbers you can search IBOATS for the Sierra equal.

Mark
 

Attachments

  • bravoimp.jpg
    bravoimp.jpg
    26.5 KB · Views: 0
Top