insaneasylm
Petty Officer 3rd Class
- Joined
- Jul 26, 2008
- Messages
- 80
ok when i was taking off the bell houseing i broke a part on the gear oil line. took the part off went to the boat place and had them look it up. They said they didn't have the part. and gave me the part # 18920a1. So i come home and look it up. Its the wrong part. They were looking at the dribble valve part. And thats not what i need.
I need the part that goes through the gimbal houseing and i cann't find it any where. Its the part when you follow the hose off the outdrive to the gimbal housing the hose is attached to it with a zip tie. From inside the engine you follow the hose back to the houseing there is a quick connect there on the hose. And the part is held in place by a snap ring. If you need to see pic i can post 1.
I need the part that goes through the gimbal houseing and i cann't find it any where. Its the part when you follow the hose off the outdrive to the gimbal housing the hose is attached to it with a zip tie. From inside the engine you follow the hose back to the houseing there is a quick connect there on the hose. And the part is held in place by a snap ring. If you need to see pic i can post 1.