build from a jig

Stoutcat

Petty Officer 2nd Class
Joined
Aug 6, 2008
Messages
180
Re: build from a jig

Hi,

Is it do-able by a newbie? Yes. (My wife and I build wooden boats for fun and profit loss.) The largest we ever built was 16', so what you're looking at is a "horse of a different wheelbase." But without a doubt, the answer is still, "Yes."

But... (You knew that there was a "But..." coming up...) But to build a 32' boat ain't gonna be easy. Things to consider:

* Before you even begin, do your homework. We found that early on (when we were just starting out in the hobby) for a sizable boat, the total build time is 50% research and 50% flying sawdust and cuss words. Decrease the research and you'll increase the cuss words. Building a model goes a very long way.

* Do a careful analysis of the cost of the build, and then multiply that by 1.5 to 2. Ditto for time required.

* Decide what's more important... Getting out on that water, or getting out on that water in a boat you built.

* Before you open your shop door, buy George Buehler's book, "Buehler's Backyard Boatbuilding" and memorize it.

* Join forums dedicated to building large wooden boats... Wooden Boat Magazine has one. I think Duckworks has one. And there are umpteen Yahoo! Groups that explore big builds. The Bolger Group is worth a look. Ask every question imaginable of those guys.

* If you have a significant other, sit down with that person and apologize for the stupid stuff that you're going to say and do in the near future. No joke. Building a boat (especially a big one) is a great way to break up a relationship.

* Expect to make profoundly dumb mistakes... On my first skiff, I made two port sides. (Let he who hath not goofed building/re-building a boat cast the first snicker.)

* Buy a gallon of epoxy/hardener/fillers, glass tape, and experiment ad nauseum.

* Read everything you can about fasteners, epoxy, glass, wood/plywood, and experiment ad nauseum.

* Scour the Web to make sure that the boat you linked is really the boat you want. Have others built it? Can you store it? Can you power it? Can you insure it? Can you afford the fuel?

* Understand that the construction of a boat that big involves stuff like plumbing, mechanics, electrical, etc.

Please don't get me wrong! I'm not trying to turn you off... But you should understand what you're getting into... If you go into the project with open eyes and an expectation that "it don't come easy" you should be fine. After the build, you won't be the same human being you were before the build, but that could be a good thing.

Best of luck to you and hope you keep us updated!

Alan
 

tashasdaddy

Honorary Moderator Emeritus
Joined
Nov 11, 2005
Messages
51,019
Re: build from a jig

unless you are skilled at carpentry, i would start with a Glen L boat, then graduate to something like that. that is a several year project. then you have to afford power for it.
 

GO OVRIT

Seaman
Joined
Jul 2, 2008
Messages
74
Re: build from a jig

I was a mechanic for years before I started building houses, so I should be able to handle the wood and power. The glass is the part that I don't have much experience with. I've been looking at some plans for 25 footers, but since I stubled on this craigslist add I figured it worth considering.
Stoutcat, I'll have to check out some of those forums.
 

Stoutcat

Petty Officer 2nd Class
Joined
Aug 6, 2008
Messages
180
Re: build from a jig

Hi,

Given your background, the work should be manageable... As for the glass... Just buy some epoxy and glass and check out sites like Glen L, West, etc. for info. Epoxy is really super easy to use once you get a little practice in...

Now a days, building a wooden boat isn't that difficult... New materials, new fasteners, and the Internet with hundreds of people to help... Very do-able.

But TD raises a good point... 32' is a big boat. A kit might not be a bad way to go.

I moderate over on the Instant Boats forum, and we have guys building skiffs just so they can get ready for a bigger build... That's a thought too...

My concern is time... To put it all in perspective... Renn Tolman designed and builds the workhorse 18' Alaskan Skiff. It's an open boat that can handle 70+ hp. Relatively speaking, it's an easy build, but still takes 300 hours... I figure that's 1.5 hrs/night with 6 hrs/weekend... that comes out to 13.5 hrs/ week or 22 weeks... Plan on tools breaking, lumberyard runs, family issues, weather problems, work hassles, goofs, sanity breaks, etc., and that's an easy 1-year build. Now extrapolate that to a 32 footer. Do-able? Absolutely! Should the project be examined from every angle? Yeah... That would be wise.

Don't get discouraged! (I plan on building a kit plane...) Just go into the project with eyes wide open.

Alan
 
Top