Sharps-Nut
Seaman
- Joined
- Feb 22, 2004
- Messages
- 65
This form is a life saver for the uniformed, thanks to all for taking time out to educate. Were working on a 1977 caravelle 165 horse 250 cid inline six merruiser engine and outdrive. Question 1, how long and at what throttle is it safe to run them on muffs and a hose? What temperature should it operate at under those conditions, I think the reciept showed a 140 degree stat. Question 2, what all fluid levels should be looked over before putting it in water. Engine oil was changed and outdrive oil was changed during winterizing by a boat mechanic. I read about vent plugs and checking fluid level, whats the correct procedure. I read about chopping the motor and ideling at shut down to avoid water being sucked in. Never knew this is there any other dumb things like this a first timer should know to do or not to do before starting his season. Lots of questions any answers deeply appreciated. Any mistake a first timer could is open for thought. I know nothing about a boat so assume that in all responses. It will be used on a small fresh water missouri, stockton lake if that helps any. Thanks for all the help I read here daily to try to learn all I can and have learned a bunch just from that. Thanks again, Sharps-Nut