frozenokie
Petty Officer 1st Class
- Joined
- Feb 4, 2008
- Messages
- 309
Well, I didn't mess with photos this time as I was too busy during and too whipped after the work this past weekend. I got the cap fastened back to the hull. The aluminum and vinyl rubrail are installed. New carpet was placed on the new floor deck and the new front deck compartment floor also along with the rod box area. She's finally coming together! I'm waiting on the steel shop to get my SS angles cut and bent to be placed on the transom to hide the ugly areas where I had to cut the cap away from the transom when it was pulled apart. This weekend, I'll have the engine installed and all the components hooked back up along with some new gadgets like courtesy lighting, tilt/trim gauge, hour meter, horn, livewell drain/fill cable, bilge pump, auto battery switch for charging trolling motor battery, and new tachometer harness. I also replaced the trailer winch and added a spare tire carrier (just need the spare wheel/tire now) which is a must.
Other things left to do: Trailer bunk carpet and trailer paint. Restore the fiberglass on the boat for oxidation damage. Put on the new custom made windshield which I had made locally.
I'll probably get to the photos this next time around.
Til then, Cheers!
Other things left to do: Trailer bunk carpet and trailer paint. Restore the fiberglass on the boat for oxidation damage. Put on the new custom made windshield which I had made locally.
I'll probably get to the photos this next time around.
Til then, Cheers!