26aftcab454
Lieutenant Commander
- Joined
- May 12, 2009
- Messages
- 1,510
I was out late Saturday on the lake and as usual on weekends I left the boat & trailer hooked up to my pick up in front of my house to go out early Sunday. 9PM I get a call from my neighbor saying he backed into the boat. The boat is a 1981 Glastron SX-190 ( Jay's old project) and the bottom of the boarding ladder was the only damage to the boat I could find.
The trailer is a differnt story. The boat slid up about 8 inches on the trailer. The bottom base of the winch stand weld is cracked open. The rear and front cross beams (4" C-channel) are bent and rotated forward . The 2 cross braces in the middle look straight.I'll try to add photos soon.
He reported the accident to the Insurance Company plus I have full coverage on the boat & trailer.
My question is can I bend these bent pieces back in place or should they be cut out and replace with new ones?
It is a very nice trailer redone better than new and do not want to get a new one.
Also if any body knows where I can find the bottom half a the ladder hook me up!
The trailer is a differnt story. The boat slid up about 8 inches on the trailer. The bottom base of the winch stand weld is cracked open. The rear and front cross beams (4" C-channel) are bent and rotated forward . The 2 cross braces in the middle look straight.I'll try to add photos soon.
He reported the accident to the Insurance Company plus I have full coverage on the boat & trailer.
My question is can I bend these bent pieces back in place or should they be cut out and replace with new ones?
It is a very nice trailer redone better than new and do not want to get a new one.
Also if any body knows where I can find the bottom half a the ladder hook me up!