1986 Bayliner, Volvo 260A. New Motar, coil, dist, plugs, all filters. The engine idles great, under load she is still fine. Problem is I am only getting about 2800-2900 rpms at wot.<br />Timing is at 8 degrees bftc.<br /><br />Could this be the carb adjustment screws? By the way that is also brand new. Last season I was getting about 4000-4300 rpms at WOT. This is with just me on the boat.<br /><br />If the carb needs adjustment, what is the starting point on the screws? Should I screw them closed and start from there? What would the number of turns be to start with?<br /><br />As always thnx guys.
