FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
I took the vent screw off first, and it kinda shot off like there was lots of pressure and then when the oil came out, i just thought it looked odd. Photo 1 is the old lube coming out, photo 2 is the new lube
I took the vent screw off first, and it kinda shot off like there was lots of pressure and then when the oil came out, i just thought it looked odd. Photo 1 is the old lube coming out, photo 2 is the new lube
Based on the aeration of the old lube I am assuming that you ran the boat just prior to changing the lube.That would be normal.I always remove the lower fill plug 1st and slowly remove the vent plug shortly after paying special attention to what immediately comes out of the lower fill plug.Water will come out first if any exists and if the boat sat for a few days before the change. Charlie
Based on the aeration of the old lube I am assuming that you ran the boat just prior to changing the lube.That would be normal.I always remove the lower fill plug 1st and slowly remove the vent plug shortly after paying special attention to what immediately comes out of the lower fill plug.Water will come out first if any exists and if the boat sat for a few days before the change. Charlie