Changeout of 3.0 to a 4.3 or 5.0 Mercruiser

powrguy

Petty Officer 2nd Class
Thread starter
Joined
Aug 7, 2009
Messages
180
I'm looking at the cost/work involved in a changeout from a 3.0L Mercruiser (1988) to either a 4.3L or a 5.0L Mercruiser. I believe the outdrive would be the Alpha 1, and wonder if the changeout would involve lots of mod's to the outdrive, or would it be a bolt-up, and just a flywheel issue? (I suspect the upper gear ratio/prop issues would be another consideration?)

thanks
 

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
71,539
Re: Changeout of 3.0 to a 4.3 or 5.0 Mercruiser

and wonder if the changeout would involve lots of mod's to the outdrive,

Ayuh,... Yes it Will...
 

powrguy

Petty Officer 2nd Class
Thread starter
Joined
Aug 7, 2009
Messages
180
Re: Changeout of 3.0 to a 4.3 or 5.0 Mercruiser

Ayuh,... Yes it Will...

I take that to mean, yes; lots of mod's to hookup to the existing outdrive? In other words, would I be better off getting a replacement complete engine/outdrive combo, instead of just getting an engine to try to re-use the existing O/D?

The 3.0 in the boat is about 10 hours old, having been completely professionally gone through, and the outdrive has also been completely serviced/checked out. There's nothing wrong with the 3.0 setup, except that I'm concerned about 130hp in a 21 foot, 2200 pound boat!
 

Shadow66

Petty Officer 3rd Class
Joined
Feb 21, 2009
Messages
76
Re: Changeout of 3.0 to a 4.3 or 5.0 Mercruiser

I take that to mean, yes; lots of mod's to hookup to the existing outdrive? In other words, would I be better off getting a replacement complete engine/outdrive combo, instead of just getting an engine to try to re-use the existing O/D?

The 3.0 in the boat is about 10 hours old, having been completely professionally gone through, and the outdrive has also been completely serviced/checked out. There's nothing wrong with the 3.0 setup, except that I'm concerned about 130hp in a 21 foot, 2200 pound boat!

Oh man, my boat is 2,200 lbs and it's an 18'. I have a 3.0 Merc Alpha 1 Gen 2 and it's fine. I have a Stingray Bowrider, not sure what yours is...but I do 45 mph with 4 people easy.
 

powrguy

Petty Officer 2nd Class
Thread starter
Joined
Aug 7, 2009
Messages
180
Re: Changeout of 3.0 to a 4.3 or 5.0 Mercruiser

Oh man, my boat is 2,200 lbs and it's an 18'. I have a 3.0 Merc Alpha 1 Gen 2 and it's fine. I have a Stingray Bowrider, not sure what yours is...but I do 45 mph with 4 people easy.

I am surprised at that. The boat is a Lund 21 foot Baron, and empty weighs in at about 2200 pounds. I don't know the prop pitch, but I suspect that it would get 35mph with the 3.0, with a couple people on board and 30 gallons in the tank. I don't know if it could top 40mph with a prop change or not. Just seems that 120/130hp in a 21 footer is a little on the weak side. Maybe not. I had a 115hp on an Aquasport 222ccp years back, and I remember how underpowered THAT was. I could get only about 30-32mph, and that boat probably was in the 2200 pound class.

I found that the powertrain is an OMC/Cobra 3.0L, 120hp. I'm trying to decide if I even WANT the OMC, based on lots o' comments regarding parts scarcity.
 
Last edited:
Top