Changing the colors of my boat

mddubya

Petty Officer 2nd Class
Joined
Aug 25, 2009
Messages
150
Well, I'm going down to my Dad's house Monday to get started on my boat. I have a 1982 Galaxy Executive, 19ft ski boat that I've made into a wakeboard boat. Right now the colors are dark blue and cream. The cream color is in great shape, looks almost brand new. However, the blue on the sides has faded bad. The carpeting in worn and the flooring under it had rotted and has to be replaced. Also, the seating in it is a mis-match conglomeration of colors I picked up along the way. Originally the boat had some beautiful peanut butter color seats in it. But as the original seats began to fall apart and had to be replaced I was unable to find replacement seating that was even close in color, forget about matching it.

I replaced the drivers side back to back recliner with a swivel captains seat and want to build some wrap around seating for the port side. I'd also like to change to Dog-house design and enlarge the sun-pad.

Now for my questions..... I'm leaning towards painting the sides black. I think this will cover the dark blue better and look sharp. For the interior I'm thinking burgundy and cream with black accents. Any opinions on this color scheme? Burgundy carpeting, the seats primarily cream color with burgundy stripes and black accents or piping.

Also, as I said, it has a small dog-house now covering the 4 banger. The boat came with small jump seats that fit on both sides of it, but we have never used them. So I'm thinking about fully enclosing the back of the boat, and having a full width sun-pad, with a access door to the engine from the top, and built in storage on both sides. I could also put some fat sacks in the storage spaces if I wanted to? This would drastically increase my storage space and hopefully dramatically quieten down the engine noise. As long as I increase the blower venting capacity I shouldn't run into any problems here should I?

I'm also going to build a full width swim platform. It will be built in 3 pieces with 4 L brackets. The center section will be notched and hinged so it can fold over when the stern-drive is raised for transportation.
 

truckermatt

Petty Officer 1st Class
Joined
Mar 29, 2009
Messages
384
Re: Changing the colors of my boat

do you have some pictures of the boat with that wakeboard tower?

i want to get one for my boat...

was it hard to install.?
 

mddubya

Petty Officer 2nd Class
Joined
Aug 25, 2009
Messages
150
Re: Changing the colors of my boat

It wasn't hard at all. You just have to give them the exact measurements of your boat. They will send you an e-mail telling your where to measure when you contact them. Here are a couple of pictures.
 

Attachments

  • iboat pic.jpg
    iboat pic.jpg
    63.9 KB · Views: 0
  • River trip 008.jpg
    River trip 008.jpg
    66.1 KB · Views: 0

mddubya

Petty Officer 2nd Class
Joined
Aug 25, 2009
Messages
150
Re: Changing the colors of my boat

Rut roh Raggey, scratch the changing color idea. SWMBO just reminded me that I have a custom ordered, (ie., not cheap), Bimini top on the boat that matches the current paint scheme, lol.

Looks like I'll be going back navy blue and cream. Oh well. :D
 

vegasphotoman

Lieutenant
Joined
Jul 13, 2009
Messages
1,411
Re: Changing the colors of my boat

That blue aint that bad....if its just the fade bothering you, have you tried that Poli-glow stuff? supposed to last all season and apply pretty easy....Ill let ya know if it works on our SleeKcraft....

Black may be a BAD IDEA....burn yourself in the summer, huge temp difference between the cram and the black, may develop stress cracks from the heat differential along the color change areas?????

if you are planning on using automotive paints....they have a "sealer" that goes on, so no color bleeds thru, it mainly for bondo repairs and such...but works well for reg paint coverage, think "KILZ" anywyas, tape off and spray that on (after you prepped with sanding and cleaning ofcourse..)
seal, paint your new color, remove tape, clearcoat the whole shebang.........
 

vegasphotoman

Lieutenant
Joined
Jul 13, 2009
Messages
1,411
Re: Changing the colors of my boat

Just read that last post by ya...missed it the 1rst tim earoundd
DOH no color change...well looks like some good elbow grease is in order to polish her up...or that poli-glow type stuff
:D
 

mddubya

Petty Officer 2nd Class
Joined
Aug 25, 2009
Messages
150
Re: Changing the colors of my boat

Just read that last post by ya...missed it the 1rst tim earoundd
DOH no color change...well looks like some good elbow grease is in order to polish her up...or that poli-glow type stuff
:D

Lol, yeah, the colors are staying the same, or close to the originals anyway. I'll try the Comet and steel wool trick I read in another thread or that Poli-Glow stuff.

The pictures were taken just after I'd spent 2 days buffing her out with a light compound and my electric buffer. It came out looking pretty good, but just didn't last very long.
 

ondarvr

Supreme Mariner
Joined
Apr 6, 2005
Messages
11,527
Re: Changing the colors of my boat

Lol, yeah, the colors are staying the same, or close to the originals anyway. I'll try the Comet and steel wool trick I read in another thread or that Poli-Glow stuff.

The pictures were taken just after I'd spent 2 days buffing her out with a light compound and my electric buffer. It came out looking pretty good, but just didn't last very long.


The reason for the gloss not lasting is because of the oils used in the compound you used, they soak in and give the illusion the surface has been brought back to life, but as the oil evaporates so does the gloss. The oxidized surface needs to be removed, which means a coarser compound, or some sanding.
 

mddubya

Petty Officer 2nd Class
Joined
Aug 25, 2009
Messages
150
Re: Changing the colors of my boat

The reason for the gloss not lasting is because of the oils used in the compound you used, they soak in and give the illusion the surface has been brought back to life, but as the oil evaporates so does the gloss. The oxidized surface needs to be removed, which means a coarser compound, or some sanding.


After reading MANY threads about it I realize that. I'm going to try the Comet and Scotch Brite pads first, if that doesn't work I'll try sanding it. The boat was kept inside its whole life before I got it, so it shouldn't be that bad. Hopefully I won't have to paint it anyway.
 

ondarvr

Supreme Mariner
Joined
Apr 6, 2005
Messages
11,527
Re: Changing the colors of my boat

Comet and sanding do the same thing, so either works, also look at the Vaseline threads.
 

vegasphotoman

Lieutenant
Joined
Jul 13, 2009
Messages
1,411
Re: Changing the colors of my boat

Uhhhhh, that is insane! Not much use in putting a sound system in that boat huh?
JET SLEEKCRAFT IE:

Hiya Mddubya
Yeah ...that is nuts eh... unless those headphones have stereo sound in em....neat but I guess it only hits 60 anyways...so bot worth all the expenses....

and PS I would definetly do the Poli-Glow on that skiboat of yours....comet will scratch it all up, vaseline works for maybye a week (good for selling a junk boat), and rubbing compound/polishing compound/then wax lasts a few weeks..and is alot of work
..the poli-glow is all season and it definetly works, a heart attack victim can apply it and.....the kit comes with the poliprep scubber and chemical that cleans the heck outta the surface, then shammy it on a couple layers....SPARKLY for the season!
follow the link to watch thier video...I am in no way affiliated with them, used thier product and liked it....
found out about it thru Dave he supplied that Chysler 300 sterndrive obsolete parts that we needed..
heres the review of 8 products for restoring gelcoat finishes including poliglow..1 year test....poli glow was the cheapest and best for the $$ about 50 to $64 for the kit. should do 2 boats 20ft long

Poli-Glow

heres one coating....beer is setting on old unpolished original finish, they reccomend 3-5 coats for 1rst application
bilge-and-Gelcoatrepairs%20(36).jpg
 

mddubya

Petty Officer 2nd Class
Joined
Aug 25, 2009
Messages
150
Re: Changing the colors of my boat

Thanks Vegas, after seeing what the Poli-Glow did on your boat that is definitely the way I'm going.
 
Top