Chrysler 35HP model 3551..1965 I think?

J

justin101

Cadet
Joined
Apr 8, 2003
Messages
16
I have a 1965 14ft larson with a Chrysler 35HP model 3551 motor on it. <br />The motor will run, just not very good. Also I have water in the lower unit. Bad seal?<br />So what I was wondering is it worth it to fix it or just get another motor? Are the chrysler engines any good? With it being that old will the parts cost an arm and a leg? <br /><br />Thanks for any help
 
A

alcan

Commander
Joined
Dec 14, 2001
Messages
2,505
Re: Chrysler 35HP model 3551..1965 I think?

Hi Justin<br />Your motor is a 1968 model. Most outboard parts cost an arm and a leg, but so do new ones. Wether or not your motor is worth repairing is up to you. I suggest you obtain a repair manual. Preform some tests and figure out what your dealing with. Ordinarly resealing a lower unit isn't a real big deal. My guess is that a handy fellow could do a real nice complete job for around $100. including manual and water pump. Less if you borrow the book. Of corse your labor is free.
 
J

justin101

Cadet
Joined
Apr 8, 2003
Messages
16
Re: Chrysler 35HP model 3551..1965 I think?

Thanks for the info Alcan.<br /><br />I've been messing with it today and started thinking "what the hell you wont know until ya try".<br /><br /> This will be my first try at working on boat motors but I'm sure I can handle it..LOL<br /><br />Thanks again...<br /><br />PS. Do you know of any places to get parts for this motor? The local shops dont have much...
 
A

alcan

Commander
Joined
Dec 14, 2001
Messages
2,505
Re: Chrysler 35HP model 3551..1965 I think?

Hi justin<br /> I haven,t figured out how to do the link thing yet but a lot of the guys here can get you some. I also have never traded on line ether. I ve heard that napa auto parts can order some parts. These will be after market parts, the parts are good, Some Napa dealers are tops, some have some work to do. You might also try Fair winds marine on line.
 
You must log in or register to reply here.
Top