Re: Coil wires on a 1982 140 mercruiser
Depends on the color coding of your engine, rather it's the newer BIA color codes, or the Pre BIA, I will give both.
Pre BIA, you should have 6 wires to the distributor.
On the - terminal of the coil.
1 Brown to distributor, 1 Brown to tachometer, 1 brown to shift interrupt switch
On the + terminal of the coil
White Resistor wire from ign switch, White to alternator, Tan to small outside terminal on starter.
On BIA, you should have 5 wires to the distributor.
1 Gray to distributor, 1 Gray to tachometer, 1 Gray to shift interrupt switch
On the + terminal of the coil
Purple Resistor wire from ign switch, Purple/yellow to small outside terminal on starter. Nothing to alternator.