So after my buzzer burned up I replaced it with a new one and I'm still getting a continues beep from it. Even when the key is just turned to the on position. The wires are getting power so I crossed out a short, I'm currently thinking it might be something with the temp sensor. But I don't know what that would have to do with the buzzer smoking/burning.
http://www.maxrules.com/graphics/omc/wiring/REMCONTBOX.jpg
My buzzer has 3 wires 2 purple connecting to the one side and a brown to the other. According to this the one purple goes to the tachometer and the other goes to the motor? (temp sensor?) and the brown is the alarm I though that was the ground wire? My problem though is my new buzzer has 2 wires a black and brownish red, so what goes where?
http://www.maxrules.com/graphics/omc/wiring/REMCONTBOX.jpg
My buzzer has 3 wires 2 purple connecting to the one side and a brown to the other. According to this the one purple goes to the tachometer and the other goes to the motor? (temp sensor?) and the brown is the alarm I though that was the ground wire? My problem though is my new buzzer has 2 wires a black and brownish red, so what goes where?
