Hello
I have a 1990 90hp force on a 18 ft bayliner.
The motor runs strong and get on plane quick. I have noticed that after running it at around 3/4 throttle for sometime then commoing down to a idle speed there is a bit of what sems to steam (white smoke) that comes from the exhaust relief holes. The alarm does not go off so I tested it and it is working, I replaced the tstat and gasket, I also removed the plug behind the tstat houseign to see if I have water making it to the top of the motor and there is a good steady spay at idle which becomes more solid if you increase the throttle. Could this be somethign other that a impeller last time it was changed was 3 years ago.
Thanks
I have a 1990 90hp force on a 18 ft bayliner.
The motor runs strong and get on plane quick. I have noticed that after running it at around 3/4 throttle for sometime then commoing down to a idle speed there is a bit of what sems to steam (white smoke) that comes from the exhaust relief holes. The alarm does not go off so I tested it and it is working, I replaced the tstat and gasket, I also removed the plug behind the tstat houseign to see if I have water making it to the top of the motor and there is a good steady spay at idle which becomes more solid if you increase the throttle. Could this be somethign other that a impeller last time it was changed was 3 years ago.
Thanks