Coupler question

[jopes]

Short story, I need one. But I do not need the input yoke that goes with it. Only ones I have seen on Iboats are the kit with the input yoke.

it is going in a 88 maxum which had a 305 soon to be a 350. Do they sell them seporatly?

 

[HT32BSX115]

Re: Coupler question

Short story, I need one. But I do not need the input yoke that goes with it. Only ones I have seen on Iboats are the kit with the input yoke.

it is going in a 88 maxum which had a 305 soon to be a 350. Do they sell them seporatly?

Howdy,

Here's a place that sells them. There's many......

http://www.sterndrive.info/sterndriveparts/engine_coupler.html

 

[Bondo]

Re: Coupler question

it is going in a 88 maxum which had a 305 soon to be a 350. Do they sell them seporatly?

Ayuh,... Assumin' yer using a like vintage 350, 'n this is a Merc. Alpha....
It calls for 18-2323, (same as 18-2175, without yoke)...

That's outa the Sierra catalog...
Which is the line iboats carries...

 

[jopes]

Re: Coupler question

Ayuh,... Assumin' yer using a like vintage 350, 'n this is a Merc. Alpha....
It calls for 18-2323, (same as 18-2175, without yoke)...

That's outa the Sierra catalog...
Which is the line iboats carries...

yes. been up now for well over 24 hours and today was the start of really digging into the project. I left out that it is a merc, alpha 1. the 350 is the same vintage.

Thanks Bond-o

 

[jopes]

Re: Coupler question

I ordered up the 18-2323 and everything is the same except the one that was on the engine did not have a 2-3 inch snout on it with a grease fitting.

Can I guess that this is a new update, or the old one had the snout with grease fitting broken off at some point?

 

[Bondo]

Re: Coupler question

I ordered up the 18-2323 and everything is the same except the one that was on the engine did not have a 2-3 inch snout on it with a grease fitting.

Can I guess that this is a new update, or the old one had the snout with grease fitting broken off at some point?

Ayuh,... As far as I know, they're interchangable...