FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
I have one cylinder not firing on my engine- the coil and wire was replaced and the old one did proved not to be working-Are there any other possibilities that could prevent one cylinder from not firing-all the others are.Thank you Andy
Is that a visual inspection?Would I pull the spark plug wire and place it 1 cm. from the plug and then run the engine checking for spark?Thank you Andy
Fact is that you need 4 things for that motor to run , that one cylinder to operate.----Fuel / compression / crankcase compression and spark at the right time.-----You have to figger out which is missing.-----I can not touch your motor from where I sit.
Thank you for the guidance-I do have compression-I will check for spark-the plug is clean-I will recheck for fuel burn however that clean plug is what caught my eye initially.Thank you Andy
