d hadley please

[Benny1963]

hey mr hadley as ya know i have the mckee with the .
175 crossflow .got it turning 5500 with 21 p no cupping
no blow out probs need some stern lift should i run a 21 p cupped and slowly move my motor up till it cavs or looses water pressure then take it back down a little ,cant trim up with out porping,dont have my smart tabs yet
also whats the best way for me to go on low water pickupand cone
is the kit hard to install and should i weld on cone or use the epoxy
thanks and late happy thanksgiving

 

[Dhadley]

Re: d hadley please

I'd think you'd be looking for something with stern/overall lift like a Turbo Ultima 4 or even a Stiletto Bay Pro III. As for the nose cone, I've found the best solution is to send the unit to Bob's and have it done. We've installed many but it's cheaper, easier, quicker and a lot less messy to have them do it. Besides, if it's not on straight you're better off without one.