So, I have read everything I can find on deck drains. I am about to start putting my floor back and I am considering adding a floor/deck drain, at about the mid point of the floor, that is plumbed in some manner to the bilge area. The reason being is I may end up building in a live well that would block normal flow back to the bilge.
In my research, I came across an item called "extend o cap" at a flooring store. (See attached image) If I secure something like this to the underside of the decking and seal it up real good, cut a hole to drain into it, then channel it back to the bilge, would that work? If not, what are some other plumbing options?
Also, I will be filling under and around the area with foam.
I have also attached an image of my boat, with a piece of floor decking laid in as reference, which has molded stringers and a center channel that runs to the bilge.
In my research, I came across an item called "extend o cap" at a flooring store. (See attached image) If I secure something like this to the underside of the decking and seal it up real good, cut a hole to drain into it, then channel it back to the bilge, would that work? If not, what are some other plumbing options?
Also, I will be filling under and around the area with foam.
I have also attached an image of my boat, with a piece of floor decking laid in as reference, which has molded stringers and a center channel that runs to the bilge.