Could use 3 sided drill bit shanks
alldodge Moderator Staff member Joined Mar 8, 2009 Messages 43,789 Yesterday at 12:48 PM #21 Could use 3 sided drill bit shanks
A airshot Admiral Joined Jul 22, 2008 Messages 6,285 Yesterday at 2:21 PM #22 alldodge said: Could use 3 sided drill bit shanks Click to expand... Far more popular today than they were just 10-15 years back for this same reason !
alldodge said: Could use 3 sided drill bit shanks Click to expand... Far more popular today than they were just 10-15 years back for this same reason !
ezbtr Captain Joined May 1, 2002 Messages 3,125 Yesterday at 5:11 PM #23 alldodge said: Could use 3 sided drill bit shanks Click to expand... but all my bits are standard/round
alldodge said: Could use 3 sided drill bit shanks Click to expand... but all my bits are standard/round
A airshot Admiral Joined Jul 22, 2008 Messages 6,285 Yesterday at 8:22 PM #24 ezbtr said: but all my bits are standard/round Click to expand... Easy enough to grind three equally spaced flats on the shank.
ezbtr said: but all my bits are standard/round Click to expand... Easy enough to grind three equally spaced flats on the shank.
bruceb58 Supreme Mariner Joined Mar 5, 2006 Messages 30,777 Yesterday at 8:54 PM #25 Buy a new drill...go cordless this time.
M Mc Tool Lieutenant Junior Grade Joined Aug 7, 2024 Messages 1,126 Yesterday at 9:54 PM #26 airshot said: Easy enough to grind three equally spaced flats on the shank. Click to expand... No its not !
airshot said: Easy enough to grind three equally spaced flats on the shank. Click to expand... No its not !
