Dhadley, modify intake info???

[bmurray]

you mentioned earlier about modifying my intake on my 85 Johnny 150. Connect left to right? How far down do I mill? Should I use a roughing mill or a finish. Not sure if it should be smooth or not. Please email me or fax any ideas you have on this, Thanks Bob<br /><br />bmurray@jcn1.com<br />fax 314-692-5169

 

[Bear]

Re: Dhadley, modify intake info???

Consider this as a bump to the top ^<br /><br />While you are waiting for Mr Dhadley you might want to read this:<br />Basic Porting - What To Cut <br /> http://www.macdizzy.com/atc.htm <br /><br />Don't try this at home

 

[Dhadley]

Re: Dhadley, modify intake info???

Yes, connect them right to left. You can connect them all as a giant plenum but going side to side works well to 7000. Just cut the wall out far enough to leave the center rib about 1/4" thick for gasket support.<br /><br />Good luck!