diameter of mono line ?

susandingo

Cadet
Joined
Aug 11, 2002
Messages
6
How do you determine the strength of mono line that has lost its label on the spool? Can you use the diameter to determine the line wt?
 

JB

Honorary Moderator Emeritus
Joined
Mar 25, 2001
Messages
45,907
Re: diameter of mono line ?

Howdy.<br /><br />I would probably throw it away, considering it too old to be reliable.<br /><br />If I just had to know, I would get out my fish weighing scale and see how much pull I could put on the line before it breaks.<br /><br />Good luck. :)
 

Boatist

Rear Admiral
Joined
Apr 22, 2002
Messages
4,552
Re: diameter of mono line ?

Very hard if you do not know the brand. As an example trileen xl 40 lb or magnathin 40 and p line 40 are about .022 but k mart bulk line is about .030. I disagree with most that say line goes bad and needs replaced very often, but you must keep it cool and out of sun light. The spring guage and pull till it breaks will work pretty well with any IFGA line but the cheap bulk lines like K mart sell will usually break at a higher weight. Like the 40 will break at 50. If you are putting it on your best rod for big fish I agree with JB, DON'T DO IT. Most 8 lb are about.008.
 
Top