does any one know what engines will bolt up to a PENTA 275 outdrive

avalentine1

Cadet
Joined
Aug 29, 2005
Messages
6
I noticed that VOLVO used several motors with the penta 275 outdrive, but which ones bolt right up. Im new to boating and im renovating this boat.<br />thanks in advance for your help
 

Don S

Honorary Moderator Emeritus
Joined
Aug 31, 2004
Messages
62,321
Re: does any one know what engines will bolt up to a PENTA 275 outdrive

That depends on what the gear ratio is, what the exhaust system is set up for and what kind of bellhousing you have.<br />What are you trying to acomplish, or do you just happen to have a 275 drive?
 

f_inscreenname

Commander
Joined
Aug 23, 2001
Messages
2,591
Re: does any one know what engines will bolt up to a PENTA 275 outdrive

It mostly has to do with the bellhousing.The transom plate is kind of generic. Most times exhaust can be rerouted. But last the drive itself is specific to the motor type (ie; 4, 6, 8 cylinders). Like Don says. <br />Need more info to be able to tell you more.
 

avalentine1

Cadet
Joined
Aug 29, 2005
Messages
6
Re: does any one know what engines will bolt up to a PENTA 275 outdrive

it got a AQ 131 engine thats frozen. how do i find out the ratio of the outdrive?
 

Don S

Honorary Moderator Emeritus
Joined
Aug 31, 2004
Messages
62,321
Re: does any one know what engines will bolt up to a PENTA 275 outdrive

With a 4 cylinder Volvo engine, the 275 was a 2.15:1 ratio.<br />You are going to need another VOLVO 4 cylinder engine to replace your old one. Otherwise you are going to have problems with motor mounts, exhaust hookup, and bellhousings.<br />The Bellhousing is designed for a Volvo engine, which is different from Chevy and Ford engines.
 

f_inscreenname

Commander
Joined
Aug 23, 2001
Messages
2,591
Re: does any one know what engines will bolt up to a PENTA 275 outdrive

Looks like your stuck with a replacement bud.
 

DBRICH

Cadet
Joined
Sep 4, 2005
Messages
10
Re: does any one know what engines will bolt up to a PENTA 275 outdrive

OK, I'm in the same boat, ha no pun intended, I have a AQ131A 4 cyl. on a 275 outdrive in a Bayliner Capri, 19'. I have similar issues, low power, pinging under loads, hi heat.<br />I'm hearing that there is no upgrade ? Ouch<br />What if i replace engine and drive ?<br />Any Hi performance tricks I can do ?<br />Please help as the boat is perfect except for this, I'm new to this site so let me know if this is making it... Thanks loads, DBR
 

Haut Medoc

Supreme Mariner
Joined
Jun 29, 2004
Messages
10,645
Re: does any one know what engines will bolt up to a PENTA 275 outdrive

DBRICH.....Welcome to iboats.... :) Start your own thread and you will get a much better response to your questions....JK
 

DBRICH

Cadet
Joined
Sep 4, 2005
Messages
10
Re: does any one know what engines will bolt up to a PENTA 275 outdrive

Got it thanks,
 
Top