Does anyone know where I can get this?

[Lrider]

This appears to be added on later, I did fine a section in the console.

It loos like a cut and fit cabinet slide, as you can see there is the upper and lower strips and 4 corners that just slip together

I would like to replace this with something similar

 

[ovrrdrive]

Re: Does anyone know where I can get this?

That looks custom to me.

 

[Lrider]

Re: Does anyone know where I can get this?

It is extruded plastic with push in corners, you could make it any shape or size

The piece on top is a section I found

 

[IH8JEEP]

Re: Does anyone know where I can get this?

This appears to be added on later, I did fine a section in the console.

It loos like a cut and fit cabinet slide, as you can see there is the upper and lower strips and 4 corners that just slip together

I would like to replace this with something similar

That is what I need. That slider is from the factory my boat has the same thing. I bet the extra parts came from below under the steering wheel. Mine had same slider below but bigger. The owner before me took the left side and top and bottom corners off and installed one large piece of plastic that you slide out and lean on side of boat. That way it was easy to change batteries. The opening with the sliders down there was tight. How long is your strip,do you have both corners. If you change the top slider I will buy the parts. Let me see if I have any pixs. I have pictures pm me I can't seem to get them to load. I just looked at my boat and I only need top left corner and the left side. Scary huh