FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Take the pin out of the shift rod (that goes under the carbs) and push the rod towards the port side. That will let the shift rod come out of the clevis.
i pulled the clip and the pin came toward port side but it appears there is a sleeve with a set hex head on the end holding it in place and i cannot imagine how to get to that with a wrench
If you push the shift rod to the port side it'll release the lower unit shift rod. You may have to jiggle the rod going under the carbs. Go to the Evinrude website and look at the parts diagram, you'll see how it works.
