Duratech Reproduction Name Plates(1 pair)

[dragos]

I recently sold my 1959 Duratech 16' Sealine and no longer need the Duratech Name Plates. They mount on the rear of the boat on each side. I purchased them in January 2008 from someone who was making name plates. They are REPRODUCTIONS with mounting rivots/instructions. They have never been installed. They measure approx 4" high x 10" long. I think I paid $50 for them so make me an offer. Best way to contact
me is call 802-893-6029. (Steve)

 

[JoeMan]

Re: Duratech Reproduction Name Plates(1 pair)

Wow, I am surprised you sold the ol' Duratech after the level of excitement you had when you first got it. Something must've changed for you. I'm sorry I / we won't be helping you through the restoration process.

If you don't get anyone here to purchase these, let me know.

Joe Mansueto - DuratechBoats.com

 

[dragos]

Re: Duratech Reproduction Name Plates(1 pair)

Joe:
Thanks for your reply and ALL your help during my restoration process. I really liked the old Duratech
and will definately miss it but unfortunately it didn't meet my needs. It was a little small for Lake Champlain and lacked enough room for my family. It was replaced with a 19' Crestliner and since I only have garage space for 1 boat the Duratech had to go. Thanks again for your help and I will let you know
if nobody is interested in the name plates.

 

[JoeMan]

Re: Duratech Reproduction Name Plates(1 pair)

Hopefully we hear from the new owner that you sold it to. You had a good reason for offing it. What year is the Crestliner?

I have the same name plates which you obviously purchased from Maurice. It may take a bit for someone to discover you have these available, but since nobody is making these, you'll easily sell them.

 

[dragos]

Re: Duratech Reproduction Name Plates(1 pair)

Joe:
The new boat is a 1990 Crestliner 19' Sabre with a 115 hp Suzuki Outboard. It is a 10 person capacity aluminum boat, very deep V with about an 8' beam.
The cover ripped and it filled with over 2 feet of water. It then sat for about 3 years so everything including the flotation foam
was trashed. After 2 years of work I am about a week away from the maiden voyage.............
The emblems have been sold... Again, thanks for ALL your help over the years..... steve

 

[58sealine]

Re: Duratech Reproduction Name Plates(1 pair)

Hello,
Do you still have the name plates and will you take $25 for them?
Tom