Easypoxy primer and paint.

[panamacitymustang]

Thanks I got some spots on the boat that's pretty hard to get to with a roller.

 

[Woodonglass]

Use Foam Brushes and get the best you can find. The more dense the foam the better.

 

[panamacitymustang]

Thanks. Will do.

 

[panamacitymustang]

Is there any benefit to three coats of primer l

 

[kcassells]

Howsabout some pics.

 

[panamacitymustang]

I tried posting some pics but it saying I exceeded the amount of byts. I tried to post a single one also.

 

[gm280]

I tried posting some pics but it saying I exceeded the amount of byts. I tried to post a single one also.

That is because you can't post anything over 400kb. Use a program to resize the pictures and they will post without issue. I used mspaint for a long time until I finally just set my camera to take lesser sized pictures. Now I can post direct.

 

[Woodonglass]

Is there any benefit to three coats of primer l

not really if the first two covers everything

 

[panamacitymustang]

Thanks I think I may do a couple spots

 

[panamacitymustang]

Do you just apply the second coat of paint or do wipe it down with mineral spirits.

 

[Woodonglass]

I scrub it with a ScotchBrite pad and wipe it down with MS.

 

[panamacitymustang]

Also how long do you wait between coats.

 

[Woodonglass]

Depending on temps...about 4 hours. If it's 70 or below, then 6-8 hours.

 

[panamacitymustang]

Thank you