FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Anyone running an ebrock carb? I am replacing engine in my 88 rinker 21ft. bowrider, going with 350 longblock and thinking of using ebrock performer aluminum intake and ebrock carb. should I be looking at 600 cfm or 750 cfm?
I ran the edlebrock roller rockers, performer intake and 1409 marine carb on a 305 that was in a 78' Fourwinns. It ran great! I got the tuning kit as well so i could change things up at Powell. It was super easy to do even on even on the water. I had the jets and metering rods down pretty small so i would think it would be fine for the 350. I was going from the stock 2 brl and it made a huge difference. Actually had to change props - went up 2" in pitch if memory serves. At the time the marine carb by edlebrock was not well known so when I took it to the shop for outdrive work the mech and I had quite a discussion
