lasvegaspatriot
Cadet
- Joined
- Jul 6, 2005
- Messages
- 18
I have a 2 bbl Holley with an electric fuel pump. Well the gas into oil has been narrowed down to the carb drowning the engine. I rebuilt the carb ( incl. new needle, seat, and float) It still wont idle and runs rough. The gas coming out of the venturi is a stream. I unplugged the power plug to the fuel pump with the engine running, after a few seconds of running rough the RPMs take off and it runs great until to float empties. I'm have to now assume that the problem is either the pump pumping too much pressure or the new float, needle and seat are not working properly. Could anyone tell me how the elec. pump regulates its pressure, I assume its internal mechanism that cant be fixed, but Im just one of those guys that has to know how it works. I gonna get a pressure tester tomorrow. but I'd still like to know whats going on inside it. thanks. To DonS. I know that you asked me last week if I had checked the pressure, well as Ive seen others say before, Im sorry I questioned your wisdom.
Last edited: