FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
1979 mariner 90hp magnetic chock stoped working, the wire is hot, i mean has power when switch is on and i push chock button at controls, but nothing else happens. Where to fing part #, so for now i have made a string to pull chock.
Check voltage as close to the choke solenoid as possible. One of those $2.00 light testers with the sharp pointed probe is good for this. Connect the ground to the solenoid body and this will test your ground as well. If you have voltage to it there, you will need to check the resistance of the solenoid coil. Not sure what it should be but will guess in the 10 to 100 ohm range. If it reads wide open or 0 ohms it is bad.
