This is my first post.But I have gained alot of information from this place.I have a 1966 Allmand 23ft.A great boat for Lake Erie.It's all good transom,hull ect.except The Motor.This had a total rebuild in 06 but was not winterized.So when I hooked the hose up and cranked it the water was coming out of the dip stick tube!!!Now I do know something is cracked somewhere.I'm looking for the best option.I do like the classic look of the boat.I have a 1969 cougar I restored so DIY isn't a problem.I do like the aspect of the stringer out drive.
I would like some opinions on my option.The Motor I have in now is a 1969 Buick V-6 1-Try and find a long block
2-Tear it down and rebuild
3-What other engine can I find or use to match the OD
4-Try and find a doner boat with a working motor
I would like to find a fuel injection 4.3 but how can I match the out drive.If I complely change the motor and out drive will I have to stay with OMC because of that rubber boot.
Thanks for some input.No sence in doing any restoration work until the motror works. Thanks Dan
I would like some opinions on my option.The Motor I have in now is a 1969 Buick V-6 1-Try and find a long block
2-Tear it down and rebuild
3-What other engine can I find or use to match the OD
4-Try and find a doner boat with a working motor
I would like to find a fuel injection 4.3 but how can I match the out drive.If I complely change the motor and out drive will I have to stay with OMC because of that rubber boot.
Thanks for some input.No sence in doing any restoration work until the motror works. Thanks Dan