Please note that the PICTURE UPLOAD function is not working. The iBoats Forum Moderators are working with the system administration folks at the parent company to get the issue resolved. This happened about a year ago and here we are again. In the meantime you can post photos as links to a picture hosting site of your choice. We are sorry about the inconvenience and will advise when the issue is resolved. Thank you for your patience.
i have a 87,evinrude 30 hp , i drained the gas tank prime bulb, drained carb replaced with new gas and oil, wont start ! i had oil mixture wrong is why i drained these put new plugs in it ,
did you check for spark? Did you check to see if new plugs are wet after several starting attempts?<br /><br />You have to determine if its a fuel or ignition issue.....
When you drained the bulb did you get it back together right.Have you got the connectors plugged on the right way around?it is possible<br />to reverse them and end up with the latch pin<br />in the fuel side.
yes mike, on that 87- evinrude, 30 hp i had wrong oil in the tank , i did run it a little bit , fouled the plugs, so i changed the plugs added new gas and oil , ran good , got to the lake would not keep running, then then wouldnt start , now no fire to the plugs . plz help thank you. jerry
