lunasuenos
Recruit
- Joined
- Aug 12, 2007
- Messages
- 4
I have a 15HP Eska. It is one of the last ones they made. I bought new in box but I am not sure the year the model number is 14211F. I has been used about 5 times. It was not run for 6 years..but gas was run out an drained. I started the boat up to sell it..started ok and ran fine. Sat for 2 weeks and then would not start at all, I took carb off thought it may have had some debris. I took it off drained the bowl saw nothing. but the little pin and spring came off under the float (sorry don't know the name for this part). I put it back together and it started and ran fine in the tank. Actually starts and runs fine with each pulls..idles ok However now the gas is dripping from the exhaust all the time. I did not put back in water to try at full speed. I took bowl back off and thought I had the pin and spring in wrong.. seems loose and ok. Put back together again and still the same thing. I can buy a kit for this..how hard is it to do? what do you think is wrong? I also see a guy on ebay will rebuild it for $55.00 I just want to get it running to sell my fishing boat.